Funny Roofing Pictures of the Day

Roofing can sometimes be a very irritating task and a lot of hard work. We made this to help you guys take a load off of the stress and take 5 minutes to relax. Here are some of the funniest roofing pictures of the day. They illustrate a different side to roofing that many people don’t see.

If you ever have any questions or roofing concerns, be sure to check out our Listings page for Atlanta Roofing Contractors. There you can find reviews as well as listings for Atlanta roofing contractors that would be glad to help you whatever your roofing situation may be.

Funny Roofing Problems

Roofing sometimes can be nightmare and if you are the neighbors roofing problems can be hilarious. We know that each homeowner hates to discuss roofing issues, repairs, or what it’s going to cost to repair a roof. However, there is a much lighter side to the roofing industry that many of you may have not seen. We collected some of the best roofing pictures that weren’t your normal roofing problems. We hope that this post brings light to our readers roofing situations.

Funny Roofing Problems

Now, if you have one of these roofing problems we don’t know what to tell you. However, if you have a roof leak or damage to your roof from a Georgia Thunderstorm than be sure to review our Atlanta Roofing Contractors to help you resolve whatever roofing problems you may be experiencing.

Types of Roofing Materials

Roofs are an easy thing to take for granted. They look simple and easy, flowing lines of shingles stacked serenely on top of each other until they reach the apex of a home and flow down the other side. But the roof of any home is layered with protective elements working together to protect it from the elements.

The bottom layer of any roofing system is the rafters, these are usually made of 2×4, 2×6, or 2×8, depending on the home. The rafters run from the base of the roof to the top and are set so that the 2 inch side is facing skyward.

OSB or plywood is then placed on top of the rafters. These are sheets are a composite of wood chips pressed together into a sturdy board that shingles will eventually be nailed into.

Felt paper goes on top the plywood. Felt paper(also called tar paper) is a thick, tough material that gets rolled out lengthwise across the roof and nailed into the plywood with nails or staples specially designed to no not tear through the paper. Felt paper is a waterproof surface provides an extra layer of protection between weather and wood.

Next is a feature unique to cold climates called the “water and ice” guard. Since water expands when it becomes ice, this rubbery layer is placed at roof’s bottom edge to prevent ice that forms there from creeping up under the shingles and bringing moisture into the house.

The final step before applying shingles is to lay drip edge. These are the metal strips all along the edge of a roof that help guide water off the roof and prevent rain from seeping into the wood when it gets under the shingles.

And last, but not least are the shingles. Because different shingles work well for different climates, architectural styles, and budgets, this is where most of a homeowner’s decision making happens.

The 3-tab shingle is the most common type of residential shingle. It is made primarily of asphalt and fiberglass, is fairly fire resistant, and quite affordable relative to other shingle options.

Growing in popularity is the architectural shingle. It is another shingle made primarily of asphalt and fiberglass, but layered much more thickly. Architectural shingles can stand up to stronger winds and have a longer life expectancy than their 3-tab cousins.

Wood shingles are a gorgeous option for homeowners who want to add a historic quality to their home. Wood shakes, are like shingles but thicker and less uniform, they add interesting lines and texture to a roof. Usually made from cedar, wooden roofs are aesthetically pleasing but be warned that they are costly to build and maintain, and frequently less fire resistant than asphalt shingles.

Clay tiles are popular in hot climates. Whereas on a hot day, asphalt shingles soak the sun’s heat right up, clay tiles reflect it back into the clouds, keeping the house and its residents cool.

Slate roofs have been seen in the USA Since before there was a USA. The first known example dates back to the early 17th century. Slate roofs are a prime example of the choice homeowners often face between quality and quantity. They provide a dignified, textured, and colorful appearance. Although very expensive to install, slate roofs can last over 100 years! A good investment if your house will be a hand me down.

Depending on where you live in the country, a certain type of roof material may be a better solution. We suggest consulting with a contractor that knows what the best material is for your home and the weather that your home is exposed to. Our chosen Atlanta Roofing Contractors prefer slate or asphalt shingle roof materials in Georgia. If you are weary about the opinion of one roofer, it is always best to consult another expert in your area.

Why Roof Repairs Need To Be Resolved Immediately?

“What goes up, must come down.” I just coined that phrase after studying the teachings of Sir Isaac Newton. It’s good right? Well yeah, it’s catchy, but for a house with a roof in disrepair, that stylish turn of phrase portends bad news. You see, the moisture at the top of a house, well, it must come down. And the duty of a roof is to make sure that when it does come down, that moisture does not come down on the wood, insulation, carpeting, stuffed animals, and other wetness averse belongings that keep us safe and happy in our homes.

Okay, roof repairs are important, but why do the need to be done immediately?

The same reason a hole in a bucket or a crack in a bathtub need to be repaired immediately. A roof issue may not seem like much at first, but in a rain shower or snowstorm, water will find it’s way through the smallest hole in the armor. When that happens, the entire house is susceptible.

Furthermore, shingles depend on each other. For instance, asphalt shingles, the type found on most single family homes, are each glued to each other with a line of tar that runs across the face of each shingle. If the wind gets under one shingle, that shingle can yank up the next one and then the next and the next until the roof looks like someone ran plow across it. Fixing a roof issue right away keeps a small problem from turning into a big one.

What does a damaged roof look like?

Roof damage does not always look dramatic. A few green patches of moss or algae growing on the roof may seem like nothing, but imagine holding a wet sponge against a piece of wood all day and expecting it not to rot. These guests love water and they love to grow. Their presence often signals that too much moisture is accumulating in one place on the roof, and damage to the wood underneath is not far behind. Check under trees. Long branches and wildlife jumping in and out of them, can put scratches and tears in a shingle.

Look for flashing that is coming loose. Roofers often lay thin metal sheets called flashing over trouble spots, as well as around skylights, sun tubes, and anything else that comes up through the roof. Because these places are a break in a roof’s consistent, flat surface, they require more skill to work on. When done poorly, these places can be exposed to more weathering and cause problems over time.

Gutters can cause roof leaks. A gutter full of debris can be just as damaging to your roof as a shingle coming loose. Clean them out a couple times a year.

What should I do if I notice damage to my roof?

If you have a guarantee from the roofing contractor who installed your roof, call them. Whatever you do, don’t try to fix it yourself. The places that need fixing on a roof are also where it’s most likely the wood is rotting through and unable to support your weight. Besides, will you know how to assess whether the damage is limited to the shingles or if it is affecting the underlayment and wood paneling as well? The roof is your home’s first line of defense against the elements, keep it, and yourself safe by calling a professional.

Kitchen Remodeling Infographic

Kitchen Remodeling is a more detailed than just upgrading appliances. There is a lot that information that goes into kitchen remodeling. The designers at Visual.ly created a really cool infographic to help consumers understand more information about Kitchen Remodeling and the process. We hope that you enjoy the infographic and all the information about kitchen remodeling that the creators discussed visually.

Now be sure to understand that our staff has displayed this this infographic. Not all the information is going to be exact to your next remodeling project. Please consult with a local remodeling contractor to discuss how your Kitchen Remodeling process will go.

The Kitchen Remodeling Process: Start to Finish

 

Why A Proper Roof Installation Is Important

A storm cloud approaches on the horizon. Bearing down on your house with waves of rain, lightning, and hail it strikes again and again, looking for any way through your home’s defense system. It threatens to bring the force of the elements to bear on everything you own, which is protected at the top only by a thin layer of asphalt, fiberglass, and a roll of paper. Aren’t you glad it was installed correctly?

A roofing install is a science, not an art. A contractor who does the job right will take the time to understand the unique requirements of your home and then follow industry best practices to make sure their work is good for decades.

Here are a few practices that can make an roof installation go right instead of wrong:

1)Installing proper ventilation. Without ventilation, attics trap warm, moist air and cause a host of problems. This air can cause wood to rot or warp and it can mean that on a hot day, even as the air conditioning blasts, the attic is working against it to keep hot air in. At the same time, too much ventilation, or ventilation in the wrong places, will allow too much air to leave the house, making the air conditioning and heating systems far less efficient. A good roofer should know how to properly ventilate a roof.

2) Selecting the right kind of shingles. When that storm approaches it’s going to put the roof to the test.
Whether it passes will depend on the stuff it’s made of. The most popular residential roof shingle is the 3 tab shingle. The 3 tab shingle is a thin sheet made primarily of asphalt and fiberglass that are relatively lightweight and affordable. It’s a basic roof covering that looks good and is an okay investment in places without extreme winds. However, for homeowners in hurricane alley, the upgrade to an architectural shingle, which is designed to last longer and stand up to heavier winds than a 3 tab, should be an easy choice. An experienced roofer will be able to help you make informed decisions on how to best equip your home for the challenges that mother nature presents.

Following manufacturer guidelines. It’s a great idea to buy shingles that come with a manufacturer’s guarantee. These can cover you for years and provide great protection in case your house somehow ends up on the receiving end of a defective shingle batch. The catch with a manufacturer’s warranty is that the shingles must be installed properly. A poorly trained roofer can engage in any number of practices that your shingles are not designed for and end up voiding the guarantee.

4) Properly installing sub surface layers. Roofs and icebergs have a lot in common. They are both blue, they float, and polar bears live on them. They are also only partly visible on the surface. As the roofing job progresses, a conscientious roofer will repair damaged wood, apply a layer of felt paper, and in cold climates they will add an ice and water guard to bottom edge of the roof. Problematically for the home owner, once the shingles go on, there is no way to make sure that the lower layers were done properly. Maintain communication with your roofing contractor and watch their progress to ensure that quality and care are put into the entire project. Even the hidden parts.

Backed Up Gutters Cause Roof Leaks

A little over a year ago my cousin called and asked me to come take a look at her attic. She and her family were spring cleaning and noticed some rot starting to take hold on the insulation and plywood on the ceiling. Well, it didn’t take an attic inspection, or even entering the house, to figure out her problem. After years of allowing debris to accumulate unchecked, the roof line of my cousin’s house had become a canopy and her gutters a forest floor where a dozen maple saplings reached their way toward the sun. I spent my day yanking these maple saplings out of her gutters wiping out soil. Gutters do not need to be a homeowner’s biggest concern, but they do serve an important function and neglecting to perform occasional maintenance can lead to major structural damage over time.

Why Do Gutters Clog?

It’s a process that happens over time. Wind, wildlife, and trees all love to deposit debris on our roofs and gutters. Most of that debris gets washed through the gutter and carried through the downspout, but some of it will stick. This can happen in any number of ways. Sometimes, and this is particularly true for homeowners with tall trees near their gutters, there is just more debris than the rain can carry. Other times it is because a stick or other large piece of detritus clogs the entryway to the downspout or because so much debris has built up inside the downspout that water can no longer run down it. Another, often overlooked reason, is that the the gutter may be coming loose or is installed at an improper angle. After cleaning the gutter of debris, pour water through it and make sure that water runs swiftly down the drain instead of pooling.

Why Do Backed Up Gutters Cause Roof Leaks?

Gutters run along the edge of the roof, but don’t do much to protect. Gutters are a moisture protection system for the fascia, siding, and foundation of a home. They collect rain runoff and carry it away from the home. But as discussed earlier, the system can break down. Instead of carrying all that water away from house, a clogged gutter will simply hold on to it and keep it right up against the edge of the roof.

In my cousin’s case, the debris build up had simply gotten out of control. The wet, fertile soil lining the inside of her gutters meant that rain had nowhere to go. In a storm, some of the rain was soaked up by the soil and the majority fell over the side of the gutter to the ground, but a fraction headed north. This water went under the shingles and pressed moisture into the plywood which forms the roof’s foundation,eventually causing it to rot. The saplings reinforced the damage by continuously depositing debris onto the roof and providing shade from the sun in all the dampest places.

What can cause your roof to leak if you don’t have a forest in your gutters? Snow and ice. When a gutter that has been accumulating water starts to freeze, that water expands. It can fill the gutter and create an ice dam that prevents rain and snow from tumbling away from the house or through the downspout. This is another situation where water has nowhere to go but up onto the roof, under the shingles, and over time, into the attic and the rest of the house.

How Do I Keep My Gutter From Clogging?

It doesn’t take much. Clean out debris twice a year, and test to the gutter to make sure it drains properly. Check the downspout and ensure water is getting through. In this case a little maintenance will go a long way. Quick safety reminder: be careful! Never climb up to do gutter maintenance without a spotter to hold your ladder steady and provide help if something goes wrong.

Choosing The Right Roofing Contractor To Help You With Your Roof Leaks

We know that it’s hard to balance life, kids, work, and then there is always the dreadful roof leaks that a homeowner endures at the worse possible time. We know that searching for the right roofing contractor can be a nightmare. Our experts have chosen the best contractors in each city for you to choose from. This allows you to get back to what you love to do and less time making sure each contractor has the necessary experience to work on your roof leak. Depending on where you live, we have selected the best Roofing Contractors in Atlanta, Orlando, Nashville, Dallas, and Chicago. If you don’t see your city, please feel free to give us a call and we will be happy to research the contractors in your area at no cost to you.

Why Re-Roofing Your Home Will Save You Money

There are several reasons why getting a new roof will save you money. First off, if you are trying to sell your home, a new roof will help put your home in a category above a lot of other homes in your price range. One of the factors that people say that they look for when buying a new home is a roof in a quality condition. No one wants to make a big purchase only to find out that within the first year that they have to dump another five or ten thousand dollars on a new roof! So be a smart seller, and make sure that your roof is in good working order before putting your roof on the market. You can also command a higher price for your home with a new roof. It’s definitely an investment that pays off in big ways for people who are ready to sell their home–fast.

What if you’re not looking to sell your home anytime soon? Well, it’s still a great investment to keep up your roof. Many people, especially those living in high rain areas, do not realize how much of a problem water damage can be because of loose tiles and holes in a roof that cause water leaks and damage to your attic and drywall, if not taken care of immediately.

We suggest that you get a roof inspection done regularly, at least once a year, to determine the condition of your roof, as well as to do any minor repairs that may be needed. Most roofing contractors will make sure that you invest in an ounce of protection, so that you don’t end up paying dearly later.

Another Reason Why Re-Roofing Your Home Will Save You Money

Another way that a new roof can save you money is by investing in a company that cares about its clients’ needs and success. We know that once a professional roofer works on your roof, you will want to keep them as part of your home improvement team for a very long time. This is a cost-saving in the future, as the chosen expert can make sure that your roof is in great working condition. If there are any problems, an expert can catch them early, and then fix them before they get out of control.

Most other contractors will not be that interested in keeping up with their clients. They get in, and they get out. That’s not how our qualified Atlanta roofing contractors work, and it doesn’t represent our values when we research a roofing contractor.

Types of Plumbing Repairs

Most plumbing repairs seem like isolated events and often they are. When a toilet clogs and needs plunging or a pipe bursts and water starts pouring into the house, it doesn’t necessarily indicate a problem with the plumbing system at large. But most plumbing repairs can also be put into a few categories. Mentally noting which category your plumbing repairs generally fall under can be helpful in a couple ways. First, it can tell you if one of the aspects of your plumbing system might need a general assessment and overhaul. Second, it can help you hone your own ability to identify plumbing problems and develop the skill set to make repairs.

A repair to the drainage system is one of the most commonly needed and undertaken by the do it yourself homeowner. Most of us have commonly seen this in the form of a clogged or overflowing toilet. Clogged drains also happen in sinks, bathtubs, pools, and anywhere else that water flows into and then out of a house. Stop these problems before they start by putting screens over every drain to filter out solid objects like hairs that love to clog drains. Never flush anything down a toilet except for toilet paper, that includes sanitary napkins and paper towels.

Clogged drains can be fixed in a couple ways. The most popular and useful to a homeowner is the plunger. Most people have a plunger for their toilet, but it’s also important to have a small one that never goes in the toilet and can be used for sinks when they clog. A second option is the snake. Snakes are long tools that go deep into a pipe, unclogging blockages that are a long way down and may be too stuck to plunge. Snakes can damage pipes if not used properly and they are best left to a professional. A third way to go is a synthetic chemical like Drano, or a natural alternative that can burn its way through a clog in a pipe.

Other Types of Plumbing Repairs

Fixing a leak is another common type of plumbing repair. Plumbing can spring a leak anywhere inside or outside the home and cause an incredible amount of damage- ruining drywall, rotting wood, and getting into the basement. Plumbing leaks happen for a variety of reasons but are most often caused by a frozen pipe bursting, or a pipe that is very old simply wearing out. Preventative measures to stop leaks include putting special freeze prevention sleeves on pipes that could be subject to extreme winter cold, and documenting the age of pipes and preemptively replacing ones that are at risk of wearing out.

Depending on your level of comfort with plumbing and the location of the pipe, a leaking pipe can be a DIY or professional job. Replacing a PVC pipe in the yard is a good job for an amateur, but digging through the foundation to unearth a leaking pipe below the house is only a good idea for a professional plumber.

A fixture repair is the third type of plumbing repair. These are pieces like shower heads, faucets, and toilet hardware need work. Fixture problems can be prevented by following installation directions very closely. A missing washer in a key place can cause any plumbing fixture to spring a leak. Most of these repairs can be done by a homeowner, just make sure to properly assess why the repair is needed so you don’t repeat the same mistakes over again. If fixing a plumbing problem just isn’t your cup of tea, don’t sweat calling several local plumbing contractors who will be happy to take your money for even the smallest fix.

Choosing The Right Color for Interior Painting

Color shopping should be fun. Going to paint stores, mixing new paint colors, bringing home samples to try out, and imagining your home’s new look, is something every homeowner looks forward to. Follow these steps to make sure you choosing the right color for interior painting.

First, visit a few paint stores. There are varying levels of price, quality, and finish to consider. Once in the stores, collect samples to take home. Even ask for a few samples that you don’t expect to like, maybe they will surprise you when you get home. If you are going to be purchasing new furniture or carpeting, take color samples with you to the paint store and see how they work together. Paint is the easiest color to change in a home, so make it work with your other choices rather than the other way around.

Second, take the paint samples home and try them all over the place. Put them on ceilings, walls, furniture, and carpeting. Try to imagine the transition from adjacent rooms into the one you are planning to paint and think about whether your new paint colors will work with the house as a whole. Consider the entire paint sample strip. Usually when you bring home a paint sample, the color you are considering is on a strip with a number of related colors. These related colors have many of the same hues as the paint color you are considering. Look at all of them on the wall to get a sense of the effect your new paint color will have on the room.

Paint test patches. After bringing home sample strips and picking a few favorites, buy enough paint to paint test patches on the wall and leave them their for a few days. Over time, it should be clearer which paint speaks to you the most. Try to pick a color that will create the right mood in a room. Light and dark are not just shades, they are emotional elements. Different colors can be feminine or masculine, cheery or gloomy, playful or serious. Try to pick a color that will enhance the mood you want in the room without being overwhelming. Make sure there is still space to add artwork or new furniture later without it feeling out of place because the paint job takes up all visual space in the room.

If nothing feels exactly right, ask a store to mix the paint color you want. Bring in photos or samples of the other colors in the room as well as the colors that are closest to what you want. A paint pro can use that information to mix you a specialized paint color that is exactly what you are looking for.

Once your wall paint color is picked out, get to work choosing paint for the ceilings and trim. Because ceilings are darker spaces in the house, it’s usually a good idea to go a few shades lighter to make it blend with the walls. For baseboards and molding you can try the same thing, or for a bolder statement pick a different, but complimentary paint color.

If you are looking for professional help from a local painting contractor, our directory of painting professionals can help you with choosing the right color for Interior Painting and help you with a professional paint service as well.

About This Page:

One of the most difficult part about redesigning a room is choosing the right color for Interior Painting. This article covers the over all process of choosing the right color before you paint the room.

© Copyright 2017, WhoKnowsaContractor.com. All rights reserved.